[INRAD] Re: [Yaesu] Filter Improvements for FT-1000D

[Hans Remeeus]

Hello Ed,

E.g. in the Main Rx 2nd and 3rd IF:

2800 Hz Inrad instead of the standard 2400 Hz Yaesu
2100 Hz Inrad as optional SSB
1000 Hz Inrad instead of the standard 500 Hz Yaesu
400/500 Hz Inrad as optional CW

Sub Rx:

2800 Hz Inrad (wire-in) instead of the standard 2400 Hz Murata

This filter setup could be qualified as "significantly".


73,
Hans Remeeus (PA1HR)
http://www.remeeus.nl
Communication is about people, the rest is technology.


---- Original Message ----
From: "Ed Senior" <eseniors at earthlink.net>
To: <yaesu at mailman.qth.net>
Sent: Friday, May 06, 2005 6:10 PM
Subject: [Yaesu] Filter Improvements for FT-1000D

> Hello -
> 
> Since the subject of filters has popped up, I'd be interested in
> knowing what filter additions/improvements have been found
> useful in stock, late-model FT-1000D's.
> 
> I should point out that I am not real excited about improving the
> CW 250 Hz mode, since that is something I rarely use.  But anything
> that significantly improves the Main or Sub receivers in other modes
> would be of interest.  (Note the qualifier "significantly!")
> 
> Thanks for any comments you (all) might have, and 73...
> 
> Ed, WE6LOL
>